- As an item of technical gear gets used the surface treatment that repels the water, the DWR, starts to age and become damaged. Maintaining a good program of care and cleaning will ensure the garment performs to its best for as long as possible, however there will come a time when the DWR requires replacing, this can be done by the domestic user with a simple wash in product. Our Proofer contains no harmful PFC's and offers an excellent level of performance
- Applying this revitalises a garment to as close as possible original performance. Washing in is the simplest way as can be done in the same wash cycle as the cleaning, saving on water and power as well as keeping washing to a minimum. To check if an item requires a little extra DWR then a simple test can be done, drip water on the other surface of the garment and if this run off then the DWR is working fine, if it clings to the surface or dampens the surface and the colour darkens then the addition of a Proofer in the wash cycle would be worth while
- The proof requires a quick tumble or iron once it has been line dried for the heat to activate the DWR finish
- Use STORM Apparel Proofer to refresh your garment - restores original finish to waterproof garments and equipment leaving a patented abrasion resistant Eco friendly finish
- PFC Free formula
- Suitable for all outdoor wear textiles
- Heat Curing and Abrasion resistant
- Recommended to use in conjunction with wash to restore breathability
- 225ml tin delivering enough Wash for 3 loads
- Trade pack contains 6 x 225ml tins
- Directions for use: Shake bottle, pour 75ml into conditioner compartment then wash following garment manufacturer's guidelines. For optimum performance use Storm Wash in detergent compartment in the same cycle. Allow to drip dry then finish drying in a tumble dryer
- Contains: Polyurethane, Polymers, Cationic
- Safe use: CAUTION: Keep out of reach of children. Avoid contact with eyes and prolonged contact with skin
SKU: STS51212